Wednesday, August 17, 2011

Procedure: How to Flash and Upgrade Samsung Galaxy Mini S5570 to 2.3.3 Gingerbread S5570XXKPF update using ODIN

Here's a simplest method on how to install and upgrade the Samsung Galaxy Mini S5570 to 2.3.3 Gingerbread (S5570XXKPF) firmware update using or flashing it with ODIN multi downloader tool. We also provide some screen-shots for beginners.

"Note: We Shall not be liable for any cause that results damage to your phone! Everything you do is at your own risk, Please proceed with extra precautions! Don't forget to back up all of your important files for it will all wipe out in this process!"



Newest firmware: Released: May 31 2011
Europe:
S5570XXKPF
BOOTLOADER: APBOOT_S5570XXKPF_CL189639_REV02 
PDA: CODE_S5570XXKPF_CL189639_REV02
CSC: CSC_S5570SERKPF_CL189639_REV02
OPS: TASS_v1.0.ops
Version: Android 2.3.3 Gingerbread
Build Date: May 2011
 DOWNLOAD
Password: samfirmware.com

ODIN Flasher Version: ODIN Multi Downloader v4.38

- PC with Windows XP SP2 or later
- .Net Framework 2.0 or later
- Samsung Galaxy Mini S5570
- USB to Micro-USB PC data cable
- Only need this if your device is rooted: Samsung Kies (Official Samsung site)  - SuperOneClick
For Beginners: If your phone is rooted follow this steps. (if your phone don't have root skip this steps):
* Install Samsung Kies
* Turn on your device
* Enable Debugging at Apliccations>Programming
* Connect your phone into PC via cable
* Launch SuperOneClick
* Click "Unroot"
* Wait
* When the process is complete turn off SuperOneClick  and unplug your phone
* Reboot to apply changes
* Then the phone is un-rooted!


Samsung Galaxy Mini S5570 2.3.3 Gingerbread S5570XXKPF Firmware Update Step by Step Flashing Procedures:
1) Turn off your Samsung Galaxy Mini
2) Remove your SIM Card and SD Card, just to avoid any issues
3) Extract the previously downloaded S5570XXKPF firmware packaged.

4) Run ODIN Multi Downloader v4.38.exe on your Desktop.
Samsung Galaxy Mini S5570 to 2.3.3 Gingerbread Guide Picture 1

5) Click the OPS button then select TASS.OPS from extracted archive and load it.
On ODIN check these checkboxes options: Protect OPS and Reset Time.
Samsung Galaxy Mini S5570 to 2.3.3 Gingerbread Guide Picture 2


6) Load all the necessary binary files BOOT, PHONE, PDA and CSC:
Samsung Galaxy Mini S5570 to 2.3.3 Gingerbread Guide Picture 3

Click BOOT button then select and load the bootloader file: 
APBOOT_S5570XXKPF_CL189639_REV02_user_mid_true.tar.md5
Click PHONE button then select and load the AMSS file:
MODEM_S5570XXKPF_CL189639_REV02.tar.md5
Click PDA button then select and load:
CODE_S5570XXKPF_CL189639_REV02_user_mid_true.tar.md5
Click CSC button then select and load:
CSC_S5570SERKPF_CL189639_REV02_user_mid_true.tar.md5
 (leave EFS and One Package empty)

7) Turn the Samsung Galaxy Mini into Download mode by pressing ( Volume Down + OK + Power ) together.
Samsung Galaxy Mini S5570 Download mode picture

8)  Then connect the phone to PC. The COM:PORT mapping will show you a yellow indication if the device is properly connected.
Samsung Galaxy Mini S5570 to 2.3.3 Gingerbread Guide Picture 4

9) Once all set and ready.. Hit the "Start" button to start flashing...
Samsung Galaxy Mini S5570 to 2.3.3 Gingerbread Guide Picture 5

10) Wait until the program will finished downloading all the binary files. It just takes around 5 minutes to complete.
Samsung Galaxy Mini S5570 to 2.3.3 Gingerbread Guide Picture 6


11) A word "PASS" will display on the left side square if the flashing successfully completes.
Samsung Galaxy Mini S5570 to 2.3.3 Gingerbread Guide Picture 7

If all things successfully done, the phone will then reboot... you may then confirm the newly downloaded firmware version name etc by typing **#1234#. Then root the phone again if you want to.

0 comments:

Post a Comment

Visitors

free counters